Adding A New Session - RIDGID SeeSnake CS1000 Operator's Manual

Playback Video
To watch a recently recorded video from the Job Review
screen, use the right Arrow Key
thumbnail of the video you want to play to the "Play" button
and then press the Select Key
Figure 32 – Video and Autolog Playback Controls
You can mute the audio on video or Autolog video playback
by pressing the Microphone Mute Key
back screen you can use the left and right Arrow Keys
to move between the playback controls�
Job Review Status Bar
During video or Autolog video playback, the appearance of
status bar will change as follows:
• The time and date on the status bar will change to re-
flect the video date and frame time stamp� To indicate
playback time and date instead of current time and
date, the text will appear as red instead of green�
• The count value displayed on the status bar will also
change during playback to reflect the distance cov-
ered in the video or Autolog video you are watching�
The text will appear as red instead of black to indicate
that it is reflecting playback distance count�
Figure 33 –
Status Bar Changes during Video Playback
Adding and Editing Notes and Issue Tags
You can also add notes and edit Issue Tags from the Job
Review screen�
To edit a note or Issue Tag's description, press the right
Arrow Key to navigate to the text box� After editing, use
the down Arrow Key to navigate to the "Save" button and
press the Select Key �
to navigate from the
�
� From the play-
Figure 34 – Editing Notes from the Job Review Screen
Use the Photo Key to add notes to photos by following
the same steps you would take to edit notes or Issue Tag
descriptions�

Adding a New Session

It will sometimes occur that you want to do more than one
inspection for the same job� For example, you may want to
inspect a kitchen drain, basement drain, and roof vent all in
one visit to discover the cause of a problem�
To add a new session to a job perform the following:
1� Press the Job Manager Key
2� Use the down Arrow Key
Session�"
3� When the blue highlight appears around "New Session,"
press the Select Key
Figure 35 – Adding a New Session
TM
�
to navigate to "New
�
English – 19