RIDGID SeeSnake CS1000 Operator's Manual page 16

Figure 21 – Video Splash Screen
The CS1000 can record video and Autolog video simultane-
ously� The two recordings are independent of each other so
if you start recording a video and then start recording Auto-
log video, you can start and stop both video types without
affecting the other�
You can also capture additional photos by pressing the
Photo Key or the Photo Tag Key
recording, press the Video Key
Taking Photos
To take a photo, press the Photo Key
containing your photo will appear each time you take one�
The photo icon on the dashboard will highlight red to indi-
cate that a photo has just been taken� You can add notes to
photos during Job Review or you can annotate your photos
during your inspection process by using the Photo Tag
feature�
Figure 22 – Photo Splash Screen
Adding Notes to Photos
Pressing the Photo Tag Key
the Issue Tag and Note screen� The note screen has a text
box where you can use the keyboard to add notes for your
customer� Notes entered here will be included in reports
alongside its associated photo�
16 – English
TM
� To stop the video
one more time�
� A splash screen
will take a photo and open
Figure 23 – Issue Tag and Note Screen
To add a note, perform the following:
1� Press the Photo Tag Key
2� Use the keyboard to type a note about the photo�
3� Press the the Select Key
note and to return to Live View�
Adding Issue Tags to Photos
The CS1000 has a built-in library of "Issue Tags" which can
be attached to images� The Issue Tags describe common
conditions found during pipe inspections such as cracks,
root intrusions, and collapsed pipes� Refer to Table 13 in
this Operator's Manual for a chart containing the Issue Tags
in your CS1000's library�
To add an Issue Tag perform the following:
1� Press the Photo Tag Key
2� Use the left Arrow Key
Tag" button� When the blue highlight is around the "Add
Issue Tag" button , press the Select Key
up the Issue Tag Library�
Figure 24 – Adding an Issue Tag
�
on the keypad to save your
�
to navigate to the "Add Issue
to open