Configuring The Cs1000; Customizing Settings - RIDGID SeeSnake CS1000 Operator's Manual

1� Open the Job Browser using one of the following
methods:
• Press the Menu Key
to navigate to the Job Browser icon
the Select Key to open the Job Browser�
• Press the Job Manager Key
Key to navigate to "Browse Reports," and press
the Select Key to open the Job Browser�
2� Use the Select Key
recycle and to uncheck the jobs you want to leave in
the Job Browser�
3� Use the right Arrow Key
button and press the Select Key
To exit the Job Browser without recycling any jobs, navigate
to the "Back" button in the lower right corner and press the
Menu Key on the keypad�

Configuring the CS1000

After configuring, the CS1000 will save and use the settings
everytime the system starts�
Main Menu
Press the Menu Key to access the main menu�
Figure 46 – Main Menu
Use the left and right Arrow Keys
three icons in the main menu: Settings
Job Browser � Use the Select Key
Use the Menu Key to exit the main menu and to return
to Live View�
, use the right Arrow Key
and press
, use the down Arrow
to check the jobs you want to
to navigate to the "Recycle"
�
to move between the
, About , and
to open the menus�

Customizing Settings

Select the Settings icon
menus� From these menus you can modify various prefer-
ences and settings�
Edit Target Media
From the Edit Target Media menu you can use the
up and down Arrow Keys
store jobs� You can store jobs to the internal drive,
a USB drive, or both� The default setting only writes jobs to
the internal drive�
Figure 47 – Set Job Storage Mode
If writing new job data to "USB Drive Only" or "USB + Inter-
nal Drive" insert a USB drive into one of the USB ports on
the front of the CS1000 and open a new job to capture new
media�
Edit Video Options
Select Edit Video Options
menu� Select between MPEG4 and MJPEG Cap-
ture Mode�
MPEG4 has a higher compression rate and results in small-
er files, but may not be compatible with your computer
system when you want to transfer the files�
Figure 48 – Video Menu
CS1000's default capture mode, MJPEG is less com-
pressed but is more widely compatible on different PC and
Mac platforms�
You can further specify MJPEG settings further by using the
down Arrow Key to move into the "MJPEG Settings" box
and then the left and right Arrow Keys
three file size options� Refer to Table 11 to learn more about
the differences between the file size options�
To apply changes, use the down Arrow Key
"Save" at the bottom of the screen and press the Select Key
� This will take you back to the settings menu� Press the
Menu Key on the keypad to return to the settings menu�
TM
to bring up the configuration
to choose how to
to open the video
to move through
to navigate to
English – 23