5.5.3 Set Interface to Bluetooth Master
This menu option configures the ARE H9 as Bluetooth master. In this configuration an
Bluetooth connection with an partner is established by the ARE H9.
In case there is still an active Bluetooth connection, this connection will be closed before a new
one is established.
Set Interface
Bluet. Master
Verify Bluetooth
Connection
Was there a Bluetooth partner for the master connection configured before, this partner will be
displayed as default option in the following dialog.
BluetoothPartner
PC_007
By pressing the arrow keys it is possible to switch the selection between the default partner and
a new partner search.
By choosing the default partner, the ARE H9 will try to establish a connection.
During this process the message "Await Connection" could appear, this is the case when the
partner is not ready or at the partner side additional activities are necessary.
---------------------------------------------------------------18/36-------------------------------------------------------------
Closing active
Connection
BluetoothPartner
PC_007
BluetoothPartner
new search