Set Interface To Bluetooth Slave - AEG ARE H9 User Manual

5.5.2 Set Interface to Bluetooth Slave

This menu option configures the ARE H9 as Bluetooth slave. With the ARE H9 as Bluetooth
Slave the Bluetooth-connection is established up by the Bluetooth-partner which is configured as
master.
The ARE H9 checks after the selection of this option if there is an active Bluetooth connection,
in this case this connection will be closed.
Then the ARE H9 is waiting until a Bluetooth connection is established or the user cancels the
operation by pressing both arrow buttons. During this operation the ARE H9 will not switch off
automatically.
Closing active
Connection
---------------------------------------------------------------17/36-------------------------------------------------------------
Set Interface
Bluet. Slave
Verify Blutooth
Connection
Await Connection
Abort ?
Connected as
BT Slave