Table of Contents
Advertisement
5.15 Language/Sprache – select display language
With this menu option is it possible to change the language of the ARE H9 menu-display.
5.16 Reader-Version
This menu option shows the Firmware Revision of the ARE H9.
6
USB driver installation
To use the online and the database mode the ARE H9 is connected via USB to a host PC.
Before the USB connection could be used a USB to RS232 bridge drive has to be installed.
Insert the driver disc supplied with the ARE H9 into your CD-Rom or DVD-Drive of the host PC
you want to use with the pocket reader. Connect the ARE H9 with the supplied USB cable to a
free USB port of your PC (USB1.1 and USB2.0 ports are supported).
ARE H9
***)
forHID Version driver installation is described in the extra documenation
---------------------------------------------------------------27/36-------------------------------------------------------------
Language/Sprache
English
AEG ID - ARE H9
V3.00136
*) ***)
USB connection cable
PC
*)
not for Rs232 version
Advertisement
Table of Contents
