Configuring Ipv6 Snooping - Cisco Nexus 9000 Series Configuration Manual

Configuring IPv6 Snooping

Command or Action
Step 13 ipv6 dhcp guard [attach-policy policy-name]
Example:
Device(config-vlan-config)# ipv6 dhcp guard
attach-policy pol1
Step 14 exit
Example:
Device(config-vlan-config)# exit
Step 15
exit
Example:
Device(config)# exit
Step 16 show ipv6 dhcp guard policy [policy-name]
Example:
Device# show ipv6 dhcp policy guard pol1
Configuring IPv6 Snooping
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12. ipv6 snooping attach-policy policy-name
13. exit
14. vlan configuration vlan-id
15. ipv6 snooping attach-policy policy-name
16. exit
17.
18. show ipv6 snooping policy policy-name
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
382
configure terminal
policy-name
ipv6 snooping policy
device-role { node | switch }
[no] limit address-count
[no] protocol dhcp | ndp
trusted-port
security-level glean | guard | inspect
tracking
exit
interface type-number
[no] switchport
exit
Configuring IPv6 First Hop Security
Purpose
Attaches a DHCPv6 guard policy to a VLAN.
Exits VLAN configuration mode and returns to global
configuration mode.
Exits global configuration mode and returns to privileged
EXEC mode.
(Optional) Displays the policy configuration as well as all
the interfaces where the policy is applied.