Configuring The Device To Forward Multicast Traffic In The Absence Of Directly Connected Igmp Hosts - Cisco Catalyst 3850 series Configuration Manual

Configuring the Device to Forward Multicast Traffic in the Absence of Directly Connected IGMP Hosts

Configuring the Device to Forward Multicast Traffic in the Absence of Directly
Connected IGMP Hosts
Perform this optional task to configure the device to forward multicast traffic in the absence of directly
connected IGMP hosts.
SUMMARY STEPS
1. enable
2. configure terminal
3. interface type number
4. Do one of the following:
5. end
6. show ip igmp interface [interface-type interface-number]
7. copy running-config startup-config
8. show running-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 configure terminal
Example:
Device# configure terminal
Step 3
interface type number
Example:
Device(config)# interface gigabitethernet
1
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
66
• ip igmp join-group group-address
• ip igmp static-group {* | group-address [source source-address]}
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Enters interface configuration mode.
• For the type and number arguments, specify an interface
that is connected to hosts.
Configuring IGMP
OL-32598-01