Configuring PIMv2 BSR
Command or Action
Step 5
end
Example:
Device(config)# end
Step 6
show running-config
Example:
Device# show running-config
Step 7
copy running-config startup-config
Example:
Device# copy running-config
startup-config
Related Topics
Example: Filtering Incoming RP Announcement Messages, on page 183
Configuring PIMv2 BSR
The process for configuring PIMv2 BSR may involve the following optional tasks:
• Defining the PIM domain border
• Defining the IP multicast boundary
• Configuring candidate BSRs
• Configuring candidate RPs
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
154
Purpose
• Create an access list that specifies the range of multicast groups from
which to accept or deny (group-list ACL).
• For source, enter the multicast group address range for which the RP
should be used.
• (Optional) For source-wildcard, enter the wildcard bits in dotted decimal
notation to be applied to the source. Place ones in the bit positions that
you want to ignore.
The access list is always terminated by an implicit deny statement for
everything.
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Configuring PIM
OL-32598-01