Enable Or Disable Document Capture With The Camera; Perform Document Capture With The Camera - Honeywell CN75 User Manual

Enable or Disable Document Capture with the Camera

You use the Profile Settings application to enable or disable document capture
with the camera. Performing document capture with the camera is disabled by
default.
Note: You can also enable document capture by setting parameters in Enterprise Settings.
1. Tap Start > ProfileSettings.
2. Tap Camera.
3. Tap Enable document image to enable document capture.
4. Tap OK.

Perform Document Capture with the Camera

After you enable document capture with the camera, document capture images are
saved to the MyDocuments\MDI directory on the computer by default.
1. Place your document on a flat surface.
2. Position the computer a few inches above the center of the document.
3. Press and hold the Scan button. The video preview and camera viewfinder
4. Move the camera to align the document edges with the viewfinder. When the
5. To view the document capture image, you can browse to MyDocuments\MDI
Settings for Document Imaging
To use the camera for document imaging, you must use the Enterprise Settings
application to configure the camera. From the main screen of Enterprise Settings,
select Data Collection > Camera > Camera Settings > Document Imaging.
Setting
Enable document
imaging
68
• To disable document capture, tap Disable bar code scan.
frame appear.
• When the viewfinder tries to detect the document edges, the viewfinder
frame is red and pulses slightly.
viewfinder detects the document edges, the viewfinder frame turns white and a
red target appears. The camera tries to focus on the center of the document.
• When the focus and distance are correct, the target turns white and the
document image is captured.
and tap the image file to view it.
Description
Enables or disables
document imaging.
Choices
• Disable
• Enable without decode
75 Series Mobile Computer User Guide