Honeywell CN75 User Manual page 78

Setting
Lighting goal
Illumination level
Initial 1D search area
Damaged 1D codes
Enable viewfinder
Focus mode
Manual focus value
Viewfinder and Focus Settings and Descriptions
Setting
Enable viewfinder
Focus mode
Manual focus value
Lighting Settings and Descriptions
Setting
Torch
66
Description
Sets the focus mode
for the camera when
reading bar codes,
document imaging, or
capturing signatures.
When Focus Mode is
set to Manual, this
value sets the manual
focus level.
Description
Sets the focus mode
for the camera when
reading bar codes,
document imaging, or
capturing signatures.
When Focus Mode is
set to Manual, this
value sets the manual
focus level.
Description
Sets whether or not to
use the lighting LED.
75 Series Mobile Computer User Guide
Choices
Default is 30.
Default is 3.
• Center
• Full
• Smart raster
• Disable
• Enable
• Enable
• Disable
• Manual
• Continuous autofocus
• Single shot autofocus
• Macro
• Extended (10 cm to infinity)
Default is 65. Set to 0 for infinity, or 255 for
closeups.
Choices
• Enable
• Disable
• Manual
• Continuous autofocus
• Single shot autofocus
• Macro
• Extended (10 cm to infinity)
Default is 65. Set to 0 for infinity, or 255 for
closeups.
Choices
• Off
• On
• Auto