Device Settings - Honeywell CN75 User Manual

Device Settings

This section lists default settings for computer-specific features such as the
backlight, good read behavior, or power management.
Backlight
Display or Keypad Setting
Display
Keypad
Features Disabled by Policy
Features Disabled by Policy State
Features Disabled by Policy State
Good Read
Good Read Setting
Internal Scanner > Beep or vibrate
Bluetooth Scanner > Beep or vibrate
Heater (CK75 Cold Storage Models Only)
Heater Settings
Temperature monitoring
In freezer heater activation
Heater enabled temperature
Heater enabled delay (minutes)
Exit freezer temperature change trigger
Exit freezer heater on duration
Pre-heat enabled delay (minutes)
Pre-heat power level (%)
Scanner heater cycle time (seconds)
Screen heater cycle time (seconds)
Heater off at battery level (%)
75 Series Mobile Computer User Guide
Brightness
Dim backlight after (on power)
Keypad backlight
Brightness (Battery power)
Brightness (External power)
Default
+1
Never
Always off
+2
+2
Default
No systems disabled
Default
One beep
One beep
Default
Enable
Disable
-10°C
0 minutes
0.5°C
5 minute
30
50%
20 seconds
10 seconds
25%
141