About Bluetooth Communications; Connect A Bluetooth Device - Honeywell CK65 Series User Manual

5. Scroll to the bottom of the screen and tap Disable (for System certificates) or
6. Tap OK.
Note: You can enable a disabled System certificate but if you remove a User certificate, you
must install it again to enable it.

About Bluetooth Communications

Your mobile computer is equipped to communicate with other devices using
Bluetooth technology. The Bluetooth radio must be turned On to discover, pair, and
connect to other Bluetooth devices. System bar icons indicate Bluetooth radio
status.

Connect a Bluetooth Device

To connect to a Bluetooth device, you must turn On the Bluetooth radio and then
select the device from a list of discovered devices.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap
4. Select a device on the list to initiate a pairing request.
5. When the pairing request message appears:
6. (Optional) Once paired to a device, you can connect manually to the device. Tap
•
CK65 Mobile Computer User Guide
Remove (for User certificates).
> Connected devices.
Pair new device. A list of Bluetooth devices appears.
• Verify the pairing PIN is the same on both device, and then tap PAIR.
OR
• If the pairing request requires a PIN, enter the PIN, and then tap PAIR.
When the device is successfully paired with the computer, the device name
appears under Paired devices.
the device under Paired devices. The word "Connected" appears under the
paired device name.
The status icon changes from
To disconnect a paired device, tap the name of the paired device and then tap
FORGET.
to .
79