Cisco Autonomous Access Points; 802.11 Network Settings - Cisco 8861 Deployment Manual

Cisco Autonomous Access Points

When configuring Cisco Autonomous Access Points, use the following guidelines:
•
Ensure 802.11r (FT) or CCKM is Enabled
•
Configure the Data Rates as necessary
•
Enable DTPC
•
Configure Quality of Service (QoS)
•
Set the WMM Policy to Required
•
Ensure Aironet Extensions is Enabled
•
Disable Public Secure Packet Forwarding (PSPF)
•
Set IGMP Snooping to Enabled

802.11 Network Settings

It is recommended to have the Cisco IP Phone 8861 and 8865 operate on the 5 GHz band only due to have many channels
available and not as many interferers as the 2.4 GHz band has.
If wanting to use 5 GHz, ensure the 802.11a/n/ac network status is Enabled.
Cisco IP Phone 8861 and 8865 Wireless LAN Deployment Guide
82