Cisco 8861 Deployment Manual page 151

•
If selecting EAP-TLS as the security mode, then must configure the type of user certificate to use.
If User installed is selected, then will need to have a user certificate installed either manually via the admin webpage
or via SCEP.
Select Save after making the necessary changes.
•
The root CA certificate of the CA chain that issues the RADIUS server certificates must be installed to enable server
validation when using EAP-TLS. Server validation is automatically enabled once a server certificate is installed.
•
Select one of the following 802.11 modes to set the frequency band, then Save.
•
Auto
•
2.4 GHz
•
5 GHz
Cisco IP Phone 8861 and 8865 Wireless LAN Deployment Guide
151