Transfer A Call; Answer Your Voip Phone With Your Cell Phone - Cisco 7945 Quick Start Manual

resume it before you can end it.

Transfer a call

To transfer a call to another phone number, do
the following:
1. When you want to transfer a call to third
party, press the Transfer button. This
places the call on hold.
2. Enter the third party's phone number.
3. To transfer the call, press the
button.
4. After transferring the call, hang up.

Answer your VoIP phone with your cell phone

You can answer your VoIP phone with your cell phone using your VoIP phone's mobility
feature.
To use your VoIP phone's mobility feature, you must configure your mobility settings
through the Cisco Unified CM User Options website. Refer to section, Configure mobility
settings with your cell phone number.
To answer your VoIP phone with your cell phone, do the following:
1. When a call is placed to your VoIP phone, your VoIP phone will ring first. After a
moment, your cell phone will begin ringing too.
2. Your cell phone will display 309-438-4300 or 309-438-4444 rather than
your caller's actual phone number. This indicates that the call is coming from
Illinois State University (i.e. from your VoIP phone), even if the original caller is
calling from a non-university phone number.
3. When you answer the call using your cell phone, your VoIP phone will stop
ringing.
4. When you are done, hang up your cell phone. The person on the other end of
the call may hear the University's hold music for a moment before your VoIP
phone ends the call.
8
Tip: It is good practice to
announce a call before
transferring it. Wait until the
third party has answered.
Then explain who you will be
transferring and the nature of
the call. When you are ready
Transfer
to transfer the call, press the
Transfer button.