Transfer A Call To Another Person; Adjust The Volume During A Call; Adjust The Phone Ringer Volume - Cisco 8865 User Manual

Hide thumbs Also See for 8865:

Table of Contents

Transfer a Call to Another Person:

When you transfer a call, you can stay on the original call until the other person answers. This

way, you can talk privately with the other person before you remove yourself from the call. If

you don't want to talk, transfer the call before the other person answers.

You can also swap between both callers to consult with them individually before you remove

yourself from the call.

Procedure

Step 1

From a call that is not on hold, press Transfer

Step 2

Enter the other person's phone number.

Step 3 (Optional) Wait until you hear the line ring or until the other person answers the

call.

Step 4 Press Transfer again.

If the sound in your handset, headset, or speakerphone is too loud or too soft, you can change

the volume while you are listening to the other person. When you change the volume during a

call, the change only affects the speaker you were using at the time. For example, if you adjust the

volume while you're using a headset, the handset volume doesn't change.

Procedure

Press Volume

If your phone ringer is too loud or too soft when you get an incoming call, you can change the

ringer volume. Changes to the ringer volume do not affect the call volume you hear when you

are on a call.

Procedure

Press Volume

right or left to adjust the volume while you are on a call.

right or left to adjust the ringer volume when the phone rings.

Table of Contents