Honda Fit 2018 Owner's Manual page 92

uuIndicatorsu
Indicator Name
Collision
Mitigation
Braking
System TM
(CMBS TM
Indicator
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
90
On/Blinking
Comes on for a few seconds when
●
you turn the ignition switch to ON
*1 , then goes off.
( w
Comes on when you deactivate
●
the CMBS TM . A multi-information
display message appears for five
seconds.
Comes on if there is a problem
●
with the CMBS TM .
Comes on when the CMBS
●
system shuts itself off.
)
*
Explanation
Stays on constantly without the
●
CMBS TM off - Have your vehicle checked
by a dealer.
2 Collision Mitigation Braking
System TM (CMBS
TM Stays on - The area around the camera is
●
blocked by dirt, mud, etc. Stop your
vehicle in a safe place, and wipe it off
with a soft cloth.
2 Front Sensor Camera
When the radar sensor gets dirty, stop
●
your vehicle in a safe place, and wipe off
dirt using a soft cloth.
Have your vehicle checked by a dealer if
●
the message does not disappear even
after you clean the sensor cover.
2 Collision Mitigation Braking
System TM (CMBS
Stays on - The temperature inside the
●
camera is too high. Use the climate control
system to cool down the camera. The
system activates when the temperature
inside the camera cools down.
2 Front Sensor Camera
Message
TM ) * P. 472
* P. 431
TM ) * P. 472
*
P. 431
*