Honda Fit 2018 Owner's Manual page 167

Hide thumbs Also See for Fit 2018:
Table of Contents

Advertisement

Rear Wiper/Washer
INT: Intermittent
ON: Continuous wipe
OFF
Washer
Operating in reverse
When you shift the transmission to
wiper operates automatically as follows even if its switch is off.
Front Wiper Position
INT (Intermittent)
LO (Low speed wipe)
HI (High speed wipe)
*1 : Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
The rear wiper and washer can be used when
the ignition switch is in ON
Wiper switch (OFF, INT, ON)
Change the wiper switch setting according to
the amount of rain.
Washer (
)
Sprays while you rotate the switch to this
position.
Hold it to activate the wiper and to spray the
washer. Once released, it stops operating
after a few more sweeps.
R with the windshield wipers activated, the rear
(
Rear Wiper Operation
Intermittent
Continuous
uuOperating the Switches Around the Steering WheeluWipers and Washers
1Wipers and Washers
If the wiper stops operating due to an obstacle such
as the build-up of snow, park the vehicle in a safe
(
w
*1
.
place.
Rotate the wiper switch to OFF, and turn the ignition
switch to ACCESSORY
remove the obstacle.
The wiper motor may stop motor operation
temporarily to prevent an overload. Wiper operation
will return to normal within a few minutes, once the
circuit has returned to normal.
or LOCK
*1
, then
(
q
(
0
165

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fit 2018

Table of Contents