Brightness Control - Honda Fit 2018 Owner's Manual

uuOperating the Switches Around the Steering WheeluBrightness Control

Brightness Control

(Select/Reset) Knob
Models without multi-information
display
Models with multi-information display
*1 : Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
166
When the parking lights are turned on and the
ignition switch is in ON *1 , you can use the
( w
(select/reset) knob to adjust instrument
panel brightness.
Brighten: Turn the knob to the right.
Dim: Turn the knob to the left.
You will hear a beep when the brightness
reaches minimum or maximum. Several
seconds after you have adjusted the
brightness, you will be returned to the
previous screen.
■
Brightness level indicator
The brightness level is shown on the display
while you are adjusting it.
1Brightness Control
Instrument panel brightness varies, depending on
whether the exterior lights are on or off. The
instrument panel dims to reduce glare when they are
on.
To cancel the reduced instrument panel brightness
when the exterior lights are on, turn the
the right until the brightness display is up to max, the
beeper sounds.
The brightness can be set differently for when the
exterior lights are on, and when they are off.
knob to