uuReplacing Light BulbsuFront Turn Signal/Parking Light Bulbs
Hold-Down Wire
Inspection Window
Front Turn Signal/Parking Light Bulbs
When replacing, use the following bulbs.
Front Turn Signal/Parking Light: 28/8 W (Amber)
Socket
512
5. Reinstall the hold-down wire. Hook the end
of the wire on the knob in the slot.
u
You can see if the hold-down wire is in
the right place from the inspection
window.
6. Reinstall the rubber weather seal.
7. Insert the coupler into the connector of the
bulb.
1. Turn the socket counter-clockwise and
Bulb
remove it.
2. Remove the old bulb and insert a new bulb.