Honda Fit 2018 Owner's Manual page 196

uuHeating and Cooling System
■
*
Cooling
■
Defrosting the Windshield and Windows
* Not available on all models
194
* uUsing Vents, Heating and A/C
1. Adjust the fan speed using the fan control
dial.
2. Select and
3. Adjust the temperature using the
temperature control dial.
4. Press the A/C button (indicator on).
■
To rapidly cool down the interior
1. Set the fan to the maximum speed.
2. Set the temperature to maximum cool.
3. Select .
*
1. Selecting turns the air conditioning
system on.
2. Select .
■
To rapidly defrost the windows
1. Set the fan to the maximum speed.
2. Select .
3. Select .
4. Set the temperature to maximum warm.
*
1To rapidly cool down the interior
If the interior is very warm, you can cool it down
more rapidly by partially opening the windows.
.
Models with ECON button
While ECON mode is active, the heating and cooling
system may have reduced cooling performance.
1Defrosting the Windshield and Windows
For your safety, make sure you have a clear view
through all the windows before driving.
Do not set the temperature near the upper or lower
limit.
When cold air hits the windshield, the outside of the
windshield may fog up.
If the side windows fog up, adjust the vents so that
the air hits the side windows.
1To rapidly defrost the windows
After defrosting the windows, switch over to fresh air
mode.
If you keep the system in recirculation mode, the
windows may fog up from humidity. This impedes
visibility.
*