Interface Module Leds - Cisco ASR 903 Troubleshooting Manual

Troubleshooting

Interface Module LEDs

The table below summarizes the LEDs for the interface modules.
The Status LED is Amber for the 10 Gigabit Ethernet ports when operating in WAN mode for the following:
• 8x1 Gigabit Ethernet SFP + 1x10 Gigabit Ethernet SFP+ Interface Module
• 8x1 Gigabit Ethernet RJ45 + 1x10 Gigabit Ethernet SFP+ Interface Module
• 2x10 Gigabit Ethernet SFP+ Interface Module
Table 19: Interface Module LEDs
LED
Power (PWR)
Status (STAT)
Link status (L)
Speed (S)
OC-3 and OC-192 Interface Module LEDs
The table below summarizes the LEDs for the OC-3 and OC-192 interface module.
Color/State
Off
Green
Off
Red
Flashing Red
Green
Off
Amber
Green
Off
Green
Cisco ASR 903 Aggregation Services Router Hardware Installation Guide
Interface Module LEDs
Description
Disabled/no power to IM
Enabled and power rails on IM in
range
Disabled/power-down
Failure (on at reset)
Booting (if local CPU)
Operational
Inactive or no connection
Fault/loop condition
Ok with activity or no activity
Inactive port status
Activity or no activity
19