T1/E1 Interface Module Leds - Cisco ASR-920-24SZ-IM Hardware Installation Manual

Overview
Table 8: SFP+ Port LED Indication
LED
Labeled same as the SFP port
number

8 T1/E1 Interface Module LEDs

The table below summarizes the LEDs for the 8 x T1/E1 interface module.
Table 9: 8 x T1/E1 Interface Module LEDs
LED
Active
Blinking green
Amber
Blinking amber
Off
LED State
Green
Off
All ports up and
one or more
ports in a
loopback state
One or more
configured ports
are down
One or more
configured ports
are down and at
least one
configured port
is in a loopback
state
All ports
disabled or shut
down
Cisco ASR-920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Aggregation Services Router Hardware Installation
LED State
Green
Blinking Green
Yellow
Off
Indication
Active
Operationally Port
down; card is
disabled or shut
down
External Interfaces
Indication
Link up in 10G
Activity in 10G
Fault/Error
Link down
Green All ports up
Guide
19