Usb Console Port Pinout - Cisco ASR 903 Troubleshooting Manual

Management Ethernet Port Pinout
Pin
8
Management Ethernet Port Pinout
A single management copper ENET port supporting 10/100/1000Base-T operation exists on each RSP. There
is no direct access to the CPU of the other RSP. It uses a standard RJ45 jack.
Note This is not a data plane port.
The table below summarizes the Management Ethernet port pinout.
Table 14: Management Ethernet Port Pinout
Pin
1
2
3
4
5
6
7
8

USB Console Port Pinout

Two individual Type-A USB connector are used for USB console and USB mass storage. One single USB
2.0 Type-A receptacle is provided on the RSP front panel for providing console access to ROMMON, IOS-XE
and diagnostics. It operates as a USB peripheral only for connection to an external host PC. This requires the
use of a Type-A to Type-A connector instead of a standard USB cable.
The use of the USB console is mutually exclusive with the RS232 console/Aux port. While a USB cable
Note
is inserted, access is automatically switched to this port.
Cisco ASR 903 Aggregation Services Router Hardware Installation Guide
14
Signal Description
S I G _ G N D _ R E T U R N Signaling ground
return
Signal Name
TRP0+
TRP0-
TRP1+
TRP1-
TRP2+
TRP2-
TRP3+
TRP3-
Type 1 2 3
— SG SG
Description
Troubleshooting
5 Usage
—