About Cameras - Cisco TelePresence SX80 Installation Manual

Installation guide for Cisco TelePresence SX80

About cameras

The codec has three HDMI camera inputs, and can therefore support up to three cameras.
Cisco provides the following cameras:
You can use any combination of these cameras, as long as the maximum number of
cameras does not exceed three .
5
See how to connect the cameras on the following pages.
For more details about the Cisco cameras, refer to camera guides that are available at
http://www.cisco.com/go/camera-docs
Note that Cisco TelePresence SpeakerTrack 60 is composed of two cameras.
5
Note that the camera surface is hot when the camera is in operation.
6
78-100153-01A0 | FEBRUARY 2014 | © 2014 Cisco Systems, Inc. All rights reserved.
Cisco TelePresence SpeakerTrack 60
based on two Cisco TelePresence Precision 60
cameras and a microphone panel for
advanced speaker tracking.
Cisco TelePresence Precision 60 is a full HD
camera with 1080p60 resolution, 20x total
zoom, and wide angle view.
Cisco TelePresence PrecisionHD 1080p 4xS2
is a full HD camera with 1080p60 resolution
and 4x optical zoom.
Connect Cisco TelePresence SpeakerTrack 60
is
Power
(100-240 VAC, 50/60 Hz)
Always use the provided
power cable and adapter
(12 V , minimum 6.5 A).
DC
Power
adapter
Connect the two cameras in the
SpeakerTrack 60 assembly to the codec's
1 and 2
st
Also connect SpeakerTrack 60 to the
codec's 2
power.
6
Refer to the installation guide that
comes with SpeakerTrack 60 for further
information about camera assembly and
cabling.
camera inputs (HDMI).
nd
or 3 Ethernet port, and to
nd rd