GE IC755CxS06RDx Quick Start Manual page 16


To install the battery
1. Remove the battery cover by pressing down
while sliding outward.
IC755CxS06RDx Battery Cover Removal
2. Connect the battery harness connector to
the header, noting keyed orientation.
IC755CxS06RDx Battery Harness Connection
3. Verify that positive (red) is down and
negative (black) is up.
4. Wrap the harness connector around to
match the following figure. Do not let the
harness connector go above the tab.
5. Slide the battery cover into place, taking care
not to pinch the harness connector.
16
Harness Connector Orientation
QuickPanel Quick Start Guide
+
GFK-2893K