Hitachi Compute Blade 500 Series Web Console Users Manual page 130

Priority
Before
Device type
Status
Name
Slot
Controller number [Management module firmware version A0240 or later]
Scheduling mode
Port
WWN/MAC
LUN
Item
Back
OK
Cancel Cancels the new settings and go back to the LPAR Information dialog box.
2-120
Table 2-132 Items in HBA boot settings
Item
Shows the priority order after changed.
Shows the priority order before changed.
Shows the type of the boot device.
Shows the state of the boot device
Shows the boot device name.
Shows the card type connected to the boot device
Shows the controller number connected to the boot device.
[Management module firmware version A0240 or later]
Shows the scheduling mode connected to the boot device.
Shows the port number connected to the boot device
Shows the WWN or MAC address assigned to the port
Shows the LU number to be used as a boot device
Table 2-133 Action button at the bottom
Returns to the HBA boot settings (Configure) dialog box.
Saves the new boot order settings and closes the HBA boot settings.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
Description