4 Get started
Prepare the remote control
For the first time use
Pull the protective sheet out.
» The remote control is ready for use.
Replace the battery
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
Note
•
Remove the battery if it is exhausted or if the remote
control is not to be used for a long time.
•
Batteries contain chemical substances, they should be
disposed of properly.
•
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
1
Pull out the battery tray.
2
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3
Insert the battery tray.
EN
12
Turn on and turn off
Turn On
Press the power button (
Turn Off
Press and hold the same power button for 3
seconds.
Set clock
1
Press MENU.
2
Press the navigation buttons to select
[SETTINGS], then press
3
Select
[GENERAL], then press
4
Press the navigation buttons to select
[TIME MODE], then press
» The time mode options are displayed:
• [12 HOUR]
• [24 HOUR]
5
Select a mode, then press
6
Press the navigation buttons to select
[TIME ADJUST], then press
7
Press
or
to enter clock, then press
.
).
.
.
.
.
.