Movie Servo Af Speed - Canon EOS 6D Mark II Instruction Manual

3 Menu Function Settings
Movie Servo AF SpeedN
When active:
You can set [Always on] to have the AF speed take effect at all times
for movie shooting (before and during movie shooting) or set [During
shooting] to have the AF speed take effect only during movie shooting.
AF speed:
You can adjust the AF speed (focus transition speed) from the standard
speed (0) to slow (one of seven levels) or fast (one of two levels) to
obtain the desired effect for the movie creation.
* Lenses supporting slow focus transition during movie shooting
USM and STM lenses released in and after 2009 are compatible. For
details, refer to the Canon Web site.
With certain lenses, even if the AF speed is adjusted, the speed may not
change.
Setting [z4: AF method] to [u+ tracking] or [Smooth zone] results in
the same effect as setting [AF speed] to [Standard (0)].
If the [z4: Movie Servo AF Speed] setting is changed from the default,
an asterisk "*" will be displayed on the right end of [z4: Movie Servo
AF Speed].
376
You can set the Movie Servo AF's AF
speed and its operation conditions.
This function is settable when [z4:
Movie Servo AF] is set to [Enable] and
[z4: AF method] is set to [Live 1-point
AF].
Additionally, the function is enabled
when using a lens supporting slow focus
transition during movie shooting*.