Setting Time From Gps On The Camera - Canon EOS 6D Mark II Instruction Manual

Setting Time from GPS on the Camera

The time information obtained from GPS signals can be set on the
camera. The margin of error is approx. ±1 sec.
If signals from at least five GPS satellites cannot be acquired, the time
cannot be auto updated. [Set now] will be grayed out and not selectable.
Even if [Set now] can be selected, updating the time may not be
possible due to an unfavorable timing of the GPS signal acquisition.
When [Auto time setting] is set to [Auto update], the date or time
cannot be manually set with [52: Date/Time/Zone].
Check the [GPS] setting.
1
Check that [GPS] is set to [Mode 1]
or [Mode 2].
Select [Auto time setting].
2
Select the desired setting.
3
Select [Auto update] or [Set now],
then press <0>.
[Auto update] updates the time when
the camera is turned on and a GPS
signal is received.
227