Table of Contents
Advertisement
q Selecting the Metering ModeN
You can select one of four methods to measure the subject brightness.
In Basic Zone modes, evaluative metering is set automatically. (In the
<8: y> mode, center-weighted average metering is set
automatically.)
Press the <q> button
1
Select the metering mode.
2
While looking at the LCD panel or the
viewfinder, turn the <6> or <5>
dial.
q: Evaluative metering
w: Partial metering
r: Spot metering
e: Center-weighted average
: Evaluative metering
q
General-purpose metering mode suited even for
backlit subjects. The camera adjusts the exposure
automatically to suit the scene.
Partial metering
w
Effective where there are much brighter lights
around the subject due to backlight, etc. Partial
metering covers approx. 6.5% of the viewfinder
area at the center.
metering
.
(9)
243
Advertisement
Table of Contents
