Table of Contents
Advertisement
3 Menu Function Settings
Movie Servo AF Speed
When active : [Always on] sets the AF adjustment speed to take effect
AF speed
: You can adjust the AF speed (focus transition speed)
* Lenses supporting slow focus transition during movie shooting
USM and STM lenses released in and after 2009 are compatible. For
details, refer to Canon website.
Setting [AF method] to [u+Tracking] gives the same effect as [AF speed]
set to [Standard (0)].
334
at all times for movie shooting (before and during movie
shooting). [During shooting] sets the AF adjustment
speed to take effect only during movie shooting.
from standard speed to slow (one of seven levels) or
fast (one of two levels), to obtain the desired effect for
movie creation.
You can set the Movie Servo AF's AF
speed and its operation conditions.
This function is settable when [Movie
Servo AF] is set to [Enable] and [AF
method] is set to [FlexiZone - Single].
Additionally, the function is enabled
when using a lens supporting slow focus
transition during movie shooting*.
Advertisement
Table of Contents
