Table of Contents
Advertisement
Before You Start
3 Setting the Image Review Time
You can set how long the image is displayed on the LCD monitor
immediately after shooting. To keep the captured image displayed, set
[Hold]. To not have the captured image displayed, set [Off].
If [Hold] is set, the image will be displayed until the auto power off time
elapses.
3 Turning the LCD Monitor Off/On
The Quick Control screen (p.61) or electronic level (p.80) can be set to
be displayed or not when you press the shutter button halfway during
viewfinder shooting.
[Remains on]: The LCD monitor display does not turn off even
[Shutter btn.]: When you press the shutter button halfway, the LCD
74
Select [Image review].
1
Under the [z1] tab, select [Image
review], then press <0>.
Set the desired time.
2
Select the desired setting, then press
<0>.
Select [LCD off/on btn].
1
Under the [52] tab, select [LCD off/
on btn], then press <0>.
Set the desired setting.
2
Select the desired setting, then press
<0>.
when you press the shutter button halfway. To turn
off the LCD monitor, press the <B> button.
monitor display turns off. When you let go of the
shutter button, the display turns on.
Advertisement
Table of Contents
