Setting The Date And Time - Canon EOS REBEL 2000 Manual

Imprinting the Date or Time (QD Model only)
3 Е To set or change the date and
Setting the Date and Time time, follow the procedure below.
Press the <MODE> button to
display the date or time to be set.
Press the <SELECT> button so that
the digit to be changed blinks.
Keep pressing the <SET> button
until the correct number appears.
Press the <SELECT> button until
none of the digits blink.
Replacing the Quartz Date Back's Battery
When the date/time on the quartz date display panel or imprinted
photograph looks faded, replace the CR2025 lithium battery as follows.
Battery life is about 3 years.
Open the camera back and loosen the
screw to remove the battery chamber
cover as shown in the figure.
2 Take out the battery.
| Insert a new battery with the
positive contact (+) facing you. Then
reattach the battery chamber cover.
Close the camera back and set
the correct date and time.