Chassis And Module Led Descriptions - Cisco 2332TQ Hardware Installation Manual

Chassis and Module LEDs for the Cisco Nexus Fabric Extenders

Chassis and Module LED Descriptions

Table E-1
Table E-1
Component
Chassis
(port side exhaust
and back)
Fan and fan tray
(port side exhaust
of chassis)
Cisco Nexus 2000 Series Hardware Installation Guide
E-2
describes the chassis LEDs for the Cisco Nexus Fabric Extenders.
LEDs for the Cisco Nexus Fabric Extenders
LED
ID
Status
Status
Status Description
On Identifies the chassis receiving the beacon signal.
(blue)
Solid on All diagnostics pass. The module is operational.
(green)
Blinking The module is cold booting, or is operational but
(green) the network interface ports are not connected to a
parent switch.
Off The module is not receiving power.
On The module is booting or running diagnostics.
(amber)
An overtemperature condition has occurred. The
temperature threshold has been exceeded by a
small value during environmental monitoring.
Blinking An overtemperature condition has occurred. The
(amber) temperature threshold has been exceeded by a
large value during environmental monitoring.
If the module fails during initial reset, the LED
continues to blink and the module does not come
online.
The module has a runtime failure and is brought
offline.
Solid on All diagnostics pass. The module is operational.
(green)
Off The module is not receiving power.
Solid on The module is booting or running diagnostics.
(amber)
Blinking If the module fails during initial reset, the LED
(amber) continues to blink and the module does not come
online.
The module has a runtime failure and is brought
offline.
Appendix E LEDs