Cisco Nexus 2248Pq Fex Chassis Features - Cisco 2332TQ Hardware Installation Manual

Chassis Features
On Cisco Nexus 7000 Series switches, for a fully dedicated 10-Gbps bandwidth through a M1 Series
Note
32-port 10-Gigabit Ethernet I/O module (either the N7K-M132XP-12 or N7K-M132XP-12L), connect
each FEX to one port in a set of four shared ports on the module (you connect each set of shared ports
to one FEX). If you are using the M2 Series 24-port, 10-Gigabit Ethernet I/O module
(N7K-M224XP-23L), you can connect the FEX to any of its ports for a fully dedicated bandwidth. If you
are using the F2 Series 48-port, 10-Gigabit Ethernet I/O module (N7K-F248XP-25), use the connectivity
rule order (connect the same port numbers for each port group (for example, if you connect ports 1 and
2 of a port-group, then connect the same ports of another port group).

Cisco Nexus 2248PQ FEX Chassis Features

The Cisco Nexus 2248PQ (N2K-C2248PQ) supports FCoE and Data Center Bridging technologies, and
it has the following interfaces:
•
•
•
The features on the fan-module side of this FEX chassis are identified in
the port side of this chassis are identified in
Figure 1-9
1
2
3
Cisco Nexus 2000 Series Hardware Installation Guide
1-14
48 1- and 10-Gigabit Ethernet (SFP+) host-facing ports
4 40-Gigabit (QSFP+) parent-switch facing fabric ports (each port can be split to four 10-Gigabit
ports)
1 management or console HDMI port
Features on the Fan-Module Side of the Cisco Nexus 2248PQ FEX Chassis
Screw holes (6) for attaching a mounting bracket.
Grounding pad
AC or DC power supply (1 or 2) (AC power supply
shown)
Figure 1-10.
4 Fan modules (4)
5 ID and Status LEDs
Chapter 1 Overview
Figure 1-9, and the features on