Cisco 2332TQ Hardware Installation Manual page 89

Appendix C Cable and Port Specifications
Table C-3
NXA-PHV-500W-B).
Table C-3
Power
Type
HVAC
HVAC
HVAC
HVDC
Jumper Power Cord
Figure C-16
Extender. The plug plugs into the Cisco Nexus Fabric Extender power supply, while the connector plugs
into the receptacle of a power distribution unit for a cabinet.
Figure C-16
lists the power cables for the HVAC/HVDC power supplies (NXA-PHV-500W and
Power Cable Specifications for HVAC/HVDC Power Supplies
Power Cord
CAB-HVAC-SD-0.6M 2-foot (0.6 m) cable with Saf-D-Grid and SD connectors (LS-25
CAB-HVAC-C14-2M
CAB-HVAC-RT-0.6M 2-foot (0.6 m) cable with Saf-D-Grid and RT connector (LS-25
CAB-HVDC-3T-2M
shows the plug connector on the optional jumper power cord for the Cisco Nexus Fabric
CAB-C13-C14-JMPR, Jumper Power Cord
Plug:
SS10A
Description
straight)
6.6-foot (2.0 m) cable with Saf-D-Grid and C14 connector (use
for up to 240 V)
right angle)
6.6-foot (2.0 m) cable with Saf-D-Grid and three terminal
connectors
Cordset rating 10A, 250V
(686mm)
Cisco Nexus 2000 Series Hardware Installation Guide
Jumper Power Cord
Connector:
HS10S
C-9