Scanner Information; Scanner Counter - Panasonic KV-S1025C SERIES Service Manual

Fig. 9.3.2.3 Error Code
Classified
Code
ST1
- 00
- 0A
- 0B
U11 11
U16 16
U18 18
U23 1C
U30 20
F17 87
F31 95
F33 97
F34 98
F37
F60 50
F61 51
*1 52
F62
*1 53
F63
Note
*1
: Available for KV-S1025C Series Only
9.3.3.

Scanner Information

This function provides various types of scanner information to an end-user or the service-person. Main contents are as follows.
(1) Model
(2) Firmware Version
(3) Board and Gate Array (LSI) version
(4) Interface
9.3.4.

Scanner Counter

Item
Update All 1. Click "Update All Counters" to update counter's values.
Counters 2. Confirm the values of the "System", "After Clean
Roller", "After Replace Double-feed Prevention Roller",
and "After Replace Paper Feed Roller" are updated on the
main menu.
Clear Counter 1. Click "Clear Counter (After Clean Roller)" on the main
(After Clean menu.
Roller) 2. According to the message on the display, click "OK" to clear
the cleaning roller counter.
3. Confirm that the counter value is zero on the main menu.
Clear Counter 1. Click "Clear Counter (After Replace Double-feed
(After Replace Prevention Roller)" on the main menu.
"Double-feed 2. According to the message on the display, click "OK" to clear
Prevention the roller replacement counter.
Roller") 3. Confirm that the counter value is zero on the main menu.
Clear Counter 1. Click "Clear Counter (After Replace Paper Feed Roller)"
(After Replace on the main menu.
"Paper Feed 2. According to the message on the display, click "OK" to clear
Roller") the roller replacement counter.
3. Confirm that the counter value is zero on the main menu.
Error Code
ST2 ST3 ST4
00 00 00 No error
00 00 00 Stop by pushing "START/STOP Button"
00 00 00 Stop by using the ADF stop-command
00 00 00 Paper jam or (Double feed error)
00 00 00 Paper jam (around Exit Roller) or (Double feed error)
00 00 00 Document remains in the scanner.
00 x 00 Paper jam or (Double feed error)
(ST3: 0 Short interval between documents / 2: Length)
00 00 00 Door open
x 00 00 Access error to the SD-RAMs (IC1008, IC1009)
(ST2: 0 Access Error / 1: SD-RAM Error)
00 00 00 Analog IC error
00 00 00 USB error
00 00 00 Access error to EEPROM
9B 01 x x Overrun error (ST3: Front Information, ST4: Back Information)
00 00 x ST4 = 00: Front side gain error
/ ST4 = 80: White-standard area was not found.
00 00 00 Front side black-level error
00 00 x ST4 = 00: Back side gain error
/ ST4 = 80: White-standard area was not found.
00 00 00 Back side black-level error
Operation
Contents
Default
67
Remarks
—
— After cleaning (Paper Feed
and Double-feed Prevention)
Rollers, execute this item.
After replacing the
—
Double-feed Prevention
Roller, execute this item.
— After replacing Paper Feed
Roller, execute this item.