Mitsubishi Q00JCPU User Manual page 583

9
PARAMETERS
(8) I/O assignment
Item Parameter No.
Type
Model
name
I/O
0400
assignment
points
Start XY
(Start I/O
No.)
Set the mounting status of each module in the system.
Table9.8 I/O assignment list
Description
Set the type of the mounted
module.
Set the model name of the
mounted module. (User memo.
Not used for the CPU module.)
H
Set the number of points of each
slot.
Set the start I/O number of each
slot.
Figure 9.8 I/O assignment
Setting range
• CPU No. 2 to No. 3: No. n/
empty (Set "CPU (Empty)" on
the slot not mounted with the
CPU module.)
No setting
• Empty, input, high-speed
input, output, intelli., hybrid I/
O, interrupt
16 characters No setting
[ Q00JCPU ]
0 points, 16 points, 32 points,
48 points, 64 points,
128 points, 256 points
No setting
[ Q00CPU, Q01CPU ]
0 points, 16 points, 32 points,
48 points, 64 points,
128 points, 256 points,
512 points, 1024 points
[ Q00JCPU ]
0 to F0
H H
No setting
[Q00CPU, Q01CPU ]
0 to 3F0
H H
9.1 PLC Parameters
9.1.1 Basic model QCPU
Default value Reference
Section 4.7
(Continued on next page)
9
9
10
11
12
- 9