Network Configuration - Cisco 7902G Administration Manual

Web Page Configuring

Network Configuration

Note
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
A-10
Table A-2 Device Information Area Items (continued)
Item
Software version
Hardware revision
Serial number
Product ID
Hardware features
BTXML cards version Version of the graphics card in the phone
The Network Configuration area of the Cisco Unified IP Phone web page displays
network configuration information and information about other phone settings.
Table A-3 describes these items.
You can obtain and set many of these items from phone itself
(Cisco Unified IP Phone 7905G and 7912G) or from the phone's IVR system
(Cisco Unified IP Phone 7902G). For more information, see
"Configuring Network Settings on the Cisco Unified IP Phone."
To display the Network Configuration area, perform either of these steps:
Access the web page for the phone as described in the
•
Settings through a Phone Configuration Web Page" section on page 4-3
then click the Network Configuration hyperlink.
In a web browser, enter this URL: ip-address/NetworkConfiguration, where
•
ip-address is the IP address of the phone.
Table A-3 Network Configuration Area Items
Item
DHCP server
BOOTP server
Appendix A Additional Configuration Methods and Parameters
Description
Version of the software running on the phone
Version of the phone hardware
Serial number of the phone
Product identifier of the phone
Reserved for future use
Description
If DHCP is enabled, the DHCP server that the pone
contacts
Not used
Chapter 4,
"Accessing Network
and
OL-8151-01