Web Page Configuring
Step 4
Web Page Configuring
Note
Accessing the Web Page for a Phone
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
A-6
Put the binary file in these locations:
The root directory on the TFTP server (C:\Program Files\cisco\tftppath)
•
The network locale directories on the TFTP server for each language that is
•
supported by Cisco Unified CallManager.
The default network locale directory on the TFTP server is C:\Program Files\
cisco\tftppath\United_States.
You can display and configure device and network information for a
Cisco Unified IP Phone by accessing the phone's web page. You can access the
web page using any graphically capable web browser.
It is recommended that you take care to prevent unauthorized access to a phone's
web page. It is also recommended that you increase security by setting a password
using the UIPassword parameter in the phone's profile file. For more information
about this parameter, see
To access the web page for a Cisco Unified IP Phone, perform the following steps.
If you want to edit parameters in the Network Parameters, Tone Parameters, or
Audio Parameters areas, you must first set up a password with the UIPassword
parameter in the profile file. If you do not set up a password, you will be able to
view information in these areas, but you will not be able to change parameters,
and Apply will not be available.
Appendix A
Additional Configuration Methods and Parameters
Table A-8 on page
A-23.
OL-8151-01