Connecting Sdc20/21, Sdc30/31 - Mitsubishi GOT1000 Series Connection Manual

21.4.4

Connecting SDC20/21, SDC30/31

1 Communication settings
Make the communication settings by operating the key of the temperature controller.
Setting items
*1
Transmission speed
Data length
Parity bit
Stop bit
*2*3
Station address
*1 Set the transmission speed according to the baud rate of the GOT side.
*2 Do not set to "0".
*3 Select the station address without overlapping with that of other unit.
21.4.5 Connecting CMC10L
1 Communication settings
Make the communication settings by operating the DIP switch of the temperature controller.
Setting items
*1
Transmission speed
*2
Frame length
*1 Set the transmission speed according to the baud rate of the GOT side.
*2 The sum of data length, parity bit and stop bit
2 Settings by switch
Front view of CMC10L body
21 - 40
21.4 Temperature Controller Side Setting
21.4.4 Connecting SDC20/21, SDC30/31
9600bps
8 bits
None
2 bits
0 to 127
9600bps, 19200bps, 38400bps
9 to 15 bits
DIP switch
Mode selector switch
Rear view of CMC10L body
Set value
Set value