Mitsubishi GOT1000 User Manual

JY997D23401D
Side
B
Side Side
A B
JAPANESE ENGLISH
RS-232 / USB Conversion adaptor
USER'S MANUAL
Manual Number JY997D23401D
Date Sep 2008
This manual describes the part names, external dimensions and specifications
of the product. Before use, read this manual and manuals of relevant products
fully to acquire proficiency in handling and operating the product. Make sure to
learn all the product information, safety information, and precautions.
And, store this manual in a safe place so that you can take it out and read it
whenever necessary. Always forward it to the end user.
Registration
The company name and the product name to be described in this manual are
the registered trademarks or trademarks of each company.
Effective Sep 2008
Specifications are subject to change without notice.
©
2008 Mitsubishi Electric Corporation
Safety Precaution
(Read these precautions before using.)
This manual classify the safety precautions into two categories:
and .
Indicates that incorrect handling may cause hazardous
conditions, resulting in death or severe injury.
Indicates that incorrect handling may cause hazardous
conditions, resulting in medium or slight personal injury or
physical damage.
Depending on circumstances, procedures indicated by
linked to serious results.
In any case, it is important to follow the directions for usage.
MOUNTING
PRECAUTIONS
• Use the conversion adaptor in the environment that satisfies the general
specifications described in GT10 User's Manual.
Never use the product in areas with excessive dust, oily smoke, conductive
dusts, corrosive gas (salt air, Cl , H S, SO or NO ), flammable gas,
2 2 2 2
vibration or impacts, or exposed to high temperature, condensation, or rain
and wind. Not doing so can cause an electric shock, fire, malfunction or
product damage or deterioration.
STARTUP/MAINTENANCE
PRECAUTIONS
• Do not disassemble or modify the conversion adaptor.
Doing so can cause a failure, malfunction, injury or fire.
• Do not touch the conductive and electronic parts of the conversion adaptor
directly. Doing so can cause a unit malfunction or failure.
• When unplugging the conversion adaptor connected to the unit, do not hold
and pull the cable portion. Doing so can cause the unit or cable to be
damaged or can cause a malfunction due to a cable connection fault.
DISPOSAL PRECAUTIONS
• When disposing of the product, handle it as industrial waste.
TRANSPORTATION
PRECAUTIONS
• Make sure to transport the conversion adaptor and/or relevant unit(s) in the
manner they will not be exposed to the impact exceeding the impact
resistance described in the general specifications of this manual, as they are
precision devices. Failure to do so may cause the unit to fail.
Check if the unit operates correctly after transportation.
Related Manuals
When using the conversion adaptor, prepare the following manual as well.
As GT10 User's Manual and GT Designer2 Version2 Basic Operation Data Transfer
Manual are sold separately, inquire at our local distributor for it.
For details of a PLC to be connected, refer to the PLC user's manual respectively.
Manual Number
Manual name
(Model Code)
Describes the GT10 hardware-relevant
content such as part names, external
GT10 JY997D24701
d i m e n s i o n s , m o u n t i n g , w i r i n g ,
User's Manual (09R819)
specifications, and introduction to
option devices.
Describes methods of the GT
GT Designer2 Version2
SH-080529ENG Designer2 installation operation, basic
Basic Operation/
operation for drawing and transmitting
(1D7M24)
Data Transfer Manual
data to GOT1000 series
: Indispensable manual
For the manuals relevant to GOT1000, refer to the PDF manuals stored in the screen
creation software used. For details about a PLC to be connected, refer to the manuals
of PLCs respectively.
For the FA transparent functionality, refer to the GX Developer Version
Manual.
Bundled Items
Product GT10-R2TUSB 5S RS-232/USB conversion adaptor
USB driver software (CD-ROM)
Included items
User's Manual (this manual)
1. Overview
The conversion adaptor convert the GOT's RS-232 interface to USB, thereby enabling
the transparent functionality to transfer and monitor the sequence program, and the
project data transfer between the GT10 main unit and the PC. Use this conversion
adaptor with the GT09-C30USB-5P type USB cable.
may also be
2. Part Names and External Dimensions
3)
40 (1.57") 200 (7.87") 75 (2.95")
1)
No. Name Specifications
1) RS-232 Connector MINI-DIN 6 Pins (male) : For connecting GOT
2) USB Connector USB MINI : For connecting USB cable
Display LED Green: Lit when the power is properly supplied
3)
(POWER) (Lit when connected to the PC with a USB cable)
Red: Lit while sending data (GOT → PC)
4) Display LED (SD)
5) Display LED (RD) Red: Lit while receiving data (PC → GOT)
3. Specifications
3.1 Operating atmosphere
Must be free of lamp black, corrosive gas, flammable gas, or excessive amount of
electroconductive dust particles and must be no direct sunlight. (Same as for saving)
General specifications are the same as the GT10 main unit.
For general specifications, refer to the GT10 main unit manual.
Contents
3.2 Performance Specifications
Level Conversion
GOT
Communication
Type
PC
Transmission speed
To GOT
Connector
shape
To USB cable USB MINI-B 5Pins (Receptacle)
RS-232 side
Supply
voltage
USB side
RS-232 side
Power
consumption
USB side
Operating
3.3 System Requirements (Communication driver)
®
Microsoft Windows
®
Microsoft Windows
OS
®
Microsoft Windows
®
Microsoft Windows
GT Designer2
Software
GX Developer
3.4 USB cable (sold separately)
Product name Model name
GT09-C30USB-
USB cable
5P (3m)
4. System Configuration
Communication driver
GT10
4) 5) 2)
Conversion adapter
5. Connecting Procedure
Unit : mm (inch)
1) Turn the GOT power off.
Weight : Approx.40g
2) Connect the RS-232 connector of the conversion adaptor to the GOT.
3) Connect the USB MINI-B connector of the USB cable to the conversion adaptor.
4) Connect the USB A connector of the USB cable to the personal computor.
5) Turn the GOT power on.
6) Make sure the display LED (POWER) lamp of the conversion adaptor is lit.
(The display LED (POWER) lamp of conversion adaptor lights when power is
supplied normally by the personal computer.)
6. Driver Installation
Procedure for installing the driver is explained below.
®
Windows XP installation follows.
• Windows ®
2000, the installation method will vary.
Installation of the driver is canceled during the following process, the installation is
not carried out correctly.
If the installation is canceled, uninstall the driver and install again.
Please refer to Chapter 8 for instructions on uninstalling the driver.
Bidirectional between RS-232 and USB
Note: This product requires USB Driver Installation for each USB port to be
RS-232
connected. To use multiple USB ports, connect this product to each port, and
USB2.0 (For full speed) install the driver individually. (Depending on the PC environment, Driver
installation may be done automatically.)
115,200/ 57,600/ 38,400/ 19,200/ 9,600/ 4,800 bps
Please install the driver with the following procedure.
MINI DIN 6Pins (Male)
1) When the USB cable is connected to the personal computer, the following
screen is displayed. (Installation of the software for USB driver)
DC5V ± 5% (from GOT)
DC5V ± 5% (from PC)
200mW (40mA/DC5V)
275mW (55mA/DC5V)
® ®
98, Windows 98SE
® ®
Millennium Edition (Windows Me)
®
2000
®
XP
Mitsubishi Electric System Service Co, LTD
Insert the included CD-ROM into the personal computer's CD-ROM drive.
Click [ Next > ].
The installation of the USB driver software will begin.
- If using Windows
Windows
Personal computer
Please select the CD-ROM drive.
2) The following screen is displayed. (Only in Windows
Installing
USB
port
+
USB cable for connecting a personal computer
(Mitsubishi Electric System Service Co, LTD)
Click [ Continue Anyway ].
® ® ®
98, Windows 98SE, Windows Millennium Edition, and Windows
® ® ®
98, Windows 98SE, Windows Millennium Edition, and
®
2000, A window to select the location of the installation files.
® XP)