Checking For Normal Monitoring - Mitsubishi GOT1000 Series Connection Manual

27.2.9 Checking for normal monitoring

1 Check for errors occurring on the GOT.
Presetting the system alarm to project data allows you to identify errors occurred on the GOT, PLC
CPU, servo amplifier and communications.
For details on the system alarm, refer to the following manual.
GT
Communication
Channel No.
Error code
Error message
Advanced alarm popup display
2 Confirming the CNC side setting
When connecting the GOT, setting is required for the CNC side.
Confirm if the CNC side setting is correct.
Section 27.2.10 CNC Side Settings
All settings related to communications are complete now.
Create screens on GT Designer2 and download the project data again.
User's Manual
With the advanced alarm popup display function, alarms are displayed as a popup
display regardless of whether an alarm display object is placed on the screen or not
(regardless of the display screen).
Since comments can be flown from right to left, even a long comment can be
displayed all.
For details of the advanced popup display, refer to the following manual.
GT Designer2 Version
27.2 MELSECNET/10 Connection (PLC To PLC Network)
(When using GT15)
Time of occurrence
(Displayed only for errors)
Screen Design Manual
27.2.9 Checking for normal monitoring
25
26
27
28
29
30
31
27 - 37