Cisco TelePresence SX80 Administrator's Manual page 18

Cisco TelePresence SX80

Introduction Introduction
How to administer the video system (page 4 of 4)
Settings available on the Touch controller
You can access the following information and settings on the
Touch controller:
• System information, call status, and diagnostics (available to
all users)
• Restart of the video system (available to all users)
• Basic settings for sound, camera, main source, display,
language (may or may not be protected by passphrase, refer
to the UserInterface > UserPreferences
• Basic settings for pairing, provisioning, network, IP and call
protocols (always protected by passphrase)
Access Settings
1. Tap the contact information in the upper left corner of the
Touch controller.
2. Tap Settings.
3. Choose a category in the list .
*
You have to enter the Username and Passphrase of the video
system to open the Administrator settings.
*
Depending on product and product set-up, your Touch controller may or may
not display the same menus as shown in the illustration.
D15328.01 SX80 Administrator Guide CE8.0, NOVEMBER 2015.
Configuration Peripherals
setting)
UserInterface >
Maintenance
Settings
Ringtone & Sound
Camera Control
Sign in to the video
Main Source Selection
system's web interface, and
Display
navigate to
Language
System
System Information
Use the
Call Status
UserPreferences
Diagnostics
to decide whether to keep
Restart these settings available
for all users, or to move
Administrator >
them to the passphrase
Available to all users
protected area.
Administrator Settings
Date, Time & Location
Call Details
Provisioning
Pairing
IP & VLAN - Codec
Network Status - Codec
IP & VLAN - Touch
Network Status - Touch
SIP
H323
Security
EMC Resilience
Reset
Protected by passphrase
UserPreferences: On (default)
18
Administrator Guide
System settings
Settings
System Information
Call Status
Diagnostics
Restart
Configuration >
Administrator
Configuration.
Available to all users
UserInterface >
setting
Administrator Settings
Ringtone & Sound
Camera Control
Main Source Selection
Display
Language
Date, Time & Location
Call Details
Provisioning
Pairing
IP & VLAN - Codec
Network Status - Codec
IP & VLAN - Touch
Network Status - Touch
SIP
H323
Security
EMC Resilience
Reset
Protected by passphrase
UserInterface >
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
Appendices
>
UserPreferences: Off