NETGEAR Nighthawk X6 Reviewer's Manual page 32

Follow these steps:
1. Open IxChariot, and select the "High_Performance_Throughput.scr" script.
2. Set the run time to 1 minute.
IxChariot Downlink Test
Set up 4 pairs of the same script for 2.4GHz, and 8 pairs for each of the two 5GHz 802.11ac traffic.

Endpoint 1: Use the IP address of the PC connected to the router via Ethernet.

Endpoint 2: Use the IP address of the computer connected via wireless.
Then run the test.
IxChariot Uplink Test
Set up 4 pairs of the same script for 2.4GHz, and 8 pairs for each of the two 5GHz 802.11ac traffic.
Set up 2 pairs of the same script.

Endpoint 1: Use the IP address of the computer connected via wireless to the router

Endpoint 2: Use the IP address of the PC connected to the router via Ethernet.
Then run the test.
IxChariot Bidirectional Test
Copy half of the IxChariot pairs from Downlink and Uplink tests into a new IxChariot Test File and run the
throughput.
32