Use the following equipment to set up this test:
Nighthawk X6-R8000
Three computers connected to the Nighthawk X6
Three computers connected to each R7000
Three NETGEAR Nighthawk-R7000 routers in bridge mode:
To connect three R7000 routers to the Nighthawk X6 using bridge mode:
1. Log in to the Nighthawk X6.
a. Launch an Internet browser from a computer or wireless device that is connected to the
network.
b. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
c. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
2. Select Wireless.
3. Specify the settings for the 2.4 GHz band in the Wireless Network (2.4 GHz b/g/n) section.
a. In the Name (SSID) field, enter the wireless network name (SSID).
b. In the Channel section, select a channel.
c. In the Mode section, select a mode.
d. In the Security Option section, select a radio button.
e. If prompted, in the Password (Network Key) field, type the passphrase (the WiFi
password that you use to connect wirelessly to the other router).
26