NETGEAR Nighthawk X6 Reviewer's Manual page 28

The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
16. Select ADVANCED > Advanced Setup > Wireless Settings.
17. Scroll down and select the Use other operation mode check box and the Enable Bridge mode
radio button.
The screen adjusts.
18. Click the setup bridge mode wireless settings button.
19. Specify the 5 GHz-One Radio settings of Nighthawk X6 which this router will connect.
a. In the Chose a Wireless Networks drop-down list, select Wireless Networks (5Ghz n/ac).
b. In the Name (SSID) field, enter the Nighthawk X6's wireless network name (SSID) for the
5 GHz-One Radio or 5 GHz-Two Radio.
c. In the Security Option section, select a radio button.
d. If prompted, type the passphrase (the WiFi password that you use to connect wirelessly
to the other router).
20. Click the Apply button.
The settings for the other router are saved and the Advanced Wireless Settings screen displays.
21. Click the Apply button on the Advanced Wireless Settings screen.
Your changes take effect.
22. Log in to the third R7000.
a. Launch an Internet browser from a computer or wireless device that is connected to the
network.
b. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
c. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
23. Select ADVANCED > Advanced Setup > Wireless Settings.
24. Scroll down and select the Use other operation mode check box and the Enable Bridge mode
radio button.
The screen adjusts.
25. Click the setup bridge mode wireless settings button.
26. Specify the 5 GHz-Two Radio settings of Nighthawk X6 which this router will connect.
a. In the Chose a Wireless Networks drop-down list, select Wireless Networks (5Ghz n/ac).
b. In the Name (SSID) field, enter the Nighthawk X6's wireless network name (SSID) for the
5 GHz-One Radio or 5 GHz-Two Radio.
c. In the Security Option section, select a radio button.
d. If prompted, type the passphrase (the WiFi password that you use to connect wirelessly
to the other router).
27. Click the Apply button.
The settings for the other router are saved and the Advanced Wireless Settings screen displays.
28. Click the Apply button on the Advanced Wireless Settings screen.
Your changes take effect.
29. Run the Iperf or IxChariot test programs.
Note: NETGEAR recommends running the Iperf or IxChaript test programs using multiple
sessions instead of a single session.
28