Specifications - Makita UH5570 Instruction Manual

ENGLISH
1-1. Switch trigger B
1-2. Switch trigger A
1-3. Switch trigger C
5-1. Hook complete
5-2. Tool's cord
5-3. Extension cord
6-1. Holder
6-2. Cord
7-1. Holder
7-2. Arm cord hook
11-1. Trimming direction
11-2. Tilt the blades
11-3. Hedge surface to be trimmed

SPECIFICATIONS

Strokes per minute (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual and follow the
warnings and safety instructions.
･
Wear eye protection.
･
Wear ear protection.
･
DOUBLE INSULATION
･
Caution: particular care and attention
required!
･
Caution: withdraw the mains plug
immediately if the cable is damaged!
･
Protect against rain and damp!
･
Wear safety gloves!
･
Withdraw the mains plug!
･
First aid
･
Recycling
･
CE marking
Explanation of general view
16-1. Press
16-2. Chip receiver
16-3. Nut
16-4. Shear blade
17-1. Nut
17-2. Branch catcher
18-1. Hooks
18-2. Fit the hooks into groove
18-3. Grooves
19-1. Press the hooks on both sides
19-2. Unlock the hooks
20-1. Screws
20-2. Blade cover
Model
Blade length
-1
)
Overall length
Net weight
Safety class
UH4570
450 mm
1,600
862 mm
3.5 kg
END220-1
Intended use
The tool is intended for trimming hedges.
EC-DECLARATION OF CONFORMITY
The undersigned, Kato, as authorized by, declare that
the MAKITA machines,
TYPE:
UH4570,UH5570,UH6570
complies
requirements of the pertinent EU guidelines:
EU machinery guideline 98/37/EC, Noise emission
2000/14/EG, EU EMC guideline 2004/108/EC.
The requirements of the above EU guidelines were
implemented chiefly on the basis of the following
standards: EN60745-2-15, EN 55014, EN61000. The
5
21-1. Under cover
21-2. Blade cover
22-1. Gear housing cover
23-1. Crank
24-1. Screws
24-2. Shear blade
25-1. Crank
26-1. Ellipse of shear blade
28-1. Ellipse of shear blade
28-2. Crank
29-1. Crank
UH5570
550 mm
1,600
970 mm
3.6 kg
/II
･
Prohibited!
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment
implementation in accordance
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally
recycling facility.
with the standard
UH6570
650 mm
1,600
1,042 mm
3.7 kg
and its
with
compatible
ENE014-1
ENH020-1
safety and health